Mixing different types can destabilize your motor oil, reducing its efficiency and affecting your engine's performance. The smartest choice is to stick with the oil type and oil change intervals recommended by your car's manufacturer and visit your local car care experts for affordable services.
Even if two different brands of oil have the same viscosity, you still should not be mixing them together. (Why anyone would even consider doing this in the first place is something we cannot comprehend. But we digress.) Technically, using a grade of oil that's recommended by your car manufacturer is correct.
Mixing two oils that have equivalent properties will not pose a problem, but final performance cannot be guaranteed. All market oils (petrol engine or diesel, mineral or synthetic) are mixable. However, a blending of two oil qualities lower the superior quality.
Mixing 5W-20 and 5W-30 (or any other oils for that matter) may lead to faster wear and tear of your engine and eventually cause problems with the basic functioning of critical engine parts. And even if your engine allows it, you won't get any noticeable results by mixing different viscosity grade oils.
Adding 10W30 to your current mix is safe, and will not cause your engine to run any worse. But keep in mind that 10W30 has more density than 5W30. These two motor oils are very similar in viscosity; hence, they might mix perfectly in your engine. Therefore, you can mix 5W30 with 10W30 with no ill effects whatsoever.
So, in the end, conventional and synthetic oils are comprised of the same, compatible components – it's just that the components in synthetics are much higher quality. While you can safely mix synthetic and conventional oils, you're doing nothing more than diluting the performance of the synthetic oil.
Yes, you can safely mix one brand of oil (e.g. Mobil 1) with a different brand (e.g. AMSOIL) or conventional oil with synthetic oil (in fact, that's what a synthetic blend is). Most synthetics today are fully compatible with conventional oils and can safely be mixed.
Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.
Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won't spray your lower cylinders for an extra second or so on each cold start.
Yes, you can top up your 5W20 with 5W30 or the other way around. Keep in mind that it's probably not a good idea to mix the two oils, because 5W30 is thicker than 5W20 but the mixture won't harm the engine anyway.
You can add any engine oil as long as it has the right specifications — preferably with an official approval of the OEM (Original Equipment Manufacturer). Not the brand, but the specification and viscosity indicated in your car's manual are your reference for using the right oil.
Mixing 10W30 with 10W40
Some say that mixing them is fine as long as you don't live in freezing weather. Even if you put together synthetic and conventional blends of these motor oils, they show no harm to your vehicle. However, this is true only if you mix in a quart of the other type to your usual engine oil.
Synthetic oil makers state that it is an acceptable practice to mix synthetic oil from different manufacturers. In fact, synthetic oil can also be safely mixed with conventional oil.
When it comes to doing oil changes, switching between synthetic and conventional oil is perfectly okay. Despite the oil myths, both oil types are compatible with each other – no engine flush needed. So, simply making the switch will not cause any damage to your engine nor impact your travels.
Overall, it is okay for you to mix oils when cooking if you need to. The mixture will be ready for frying, however, when it reaches the lower temperature. It will not rely on the average of the two oils but the lower smoke point.
The symptoms of too much car oil
If it is overfilled, the following may occur: Dense white smoke – If you drive your car and see plenty of thick, white exhaust smoke, excess oil may be burning within the engine block, although fluids such as antifreeze may also be the culprit.
Lose a little gas. mileage and lubrication is not as good plus it puts more strain on the oil pump. Never go thicker than a 5w30 and that would be more for an older higher mileage engine in warmer climates.
When too much oil is added, the level in the oil pan becomes too high. That allows a fast-moving lobed rod called the crankshaft to come into contact with the oil and essentially aerate it. The result is a foamy, frothy substance that cannot properly lubricate the engine.
Is It Ok To Mix 10w40 With 5w30? The brand should be the same as the product. It is not compatible with the additives to mix brands.
Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.
This is one of our most frequently asked questions and the simple answer is yes, as long as it does not say energy conserving on the label. Because cars need the extra mileage there are additives in the oil that is there to reduce friction.
Can oils of different grades be mixed? The good news is that mixing different types of oil it will not harm your engine in any way in the short run. Most synthetic and semi-synthetic engine oils are based on regular oil and are compatible.
The truth is simple: don't mix two different oils that have different weights (viscosities). Viscosity Grades might sound pretty scientific, but the simple fact is that this is what keeps your engine running smoothly. A common question is whether you can mix 5w30 and 10w40.
Myth: Once you switch to synthetic oil, you can never switch back. This is one of the most persistent myths about synthetic oil—and completely untrue. You can switch back and forth at any time. In fact, synthetic blends are simply a mixture of synthetic and conventional oils.